Foldable steel cages and stillages for builders, fitters, formwork and scaffold crews. Load the job in the yard, fork or crane it onto site, and bring the frame back folded flat. Designed, tested and shipped Australia-wide.

Kit the whole job into one cage — fixings, brackets, plumbing and electrical fit-off, hardware. It leaves the yard complete and comes back with what was not used, still counted.
Timber offcuts, bricks and blocks, sheet stock, formwork ply, reo mesh and bagged product held in a steel frame instead of loose on the slab.
Bundled tubes, fittings, couplers, props and clamps stay together and forkable. No loose steel rolling around the site or the truck tray.
Power tools, generators, compactors and hoses locked in one secure cage that lifts on and off by forklift or crane.
Come strip-out, the same cage becomes a waste crate — fill it, fork it straight onto the truck and it is off the slab. No double handling, no skips, no tipping it twice.
Materials are handled once in the yard instead of piece by piece at the truck, the gate and the level.
Fixings and tools stay in a countable steel frame, so what left the yard is what comes back.
Nothing to wrap, nothing to cut open on site — and no single-use plastic film heading to landfill.
In the yard or store, loaded cages interlock and stack up to six high with no racking to install.
Load it as a waste crate, fork it onto the truck and it is gone — no skip, no tipping it twice, no double handling.
Fork pockets, lifting lugs and a square frame make the cage easy to tie down and transport — load it once, strap it, and it ships as one unit.


| Size | Footprint | Safe load | Typical use |
|---|---|---|---|
| Small | 800 × 600 mm | 500 kg | Fixings, fit-off parts, hand tools |
| Medium | 1,200 × 800 mm | 1,000 kg | Job-lot materials, formwork hardware, bagged product |
| Large | 1,600 × 1,200 mm | 1,500 kg | Scaffold tubes, timber, sheet stock, plant |
Tell us what a typical job load looks like and how it gets lifted. We size the cage around the work, not the other way round.
One cage holds the whole job — fixings, brackets, plumbing and electrical fit-off — so it leaves the yard complete and comes back counted. No loose material on the slab, no shrink wrap to cut, no double handling at strip-out. The same frame stacks six high in the yard and folds flat for the return trip, so the site stays organised and the crew keeps moving.
Yes. Welded steel frames, forklift entry on all four sides, and every unit load tested and stamped before dispatch. They are built for daily rough handling, not tidy warehouse work.
Lifting lugs are fitted so a loaded cage can be craned as one unit, or forked from a truck tray. Tell us how you plan to lift and we will spec the frame to suit.
Loaded cages interlock and stack up to six high in a yard or store, so the same footprint holds six times the material with no racking to install or bolt down.
Empties fold flat in seconds, so a truck brings back roughly four times the cages it delivered and your yard is not full of empty frames.
Painted in a hard-wearing RAL powder coat as standard, with a heavier-duty coating available for yards and exposed site storage.
Yes. Colour, plates and numbering can be set for volume runs so cages track back to a site, a crew or a hire fleet.
Fitting out a yard or store? Compare stillages against fixed pallet racking, or see the collapsible pallet cage range.
Send your quantities and what you load — we quote within one working day.